I have a Norstar MICS that when powered up comes up in maintenance mode. At this point, I have found no way to get it out. Any ideas will be greatly appreciated.
System is used, probably had an expansion card in it. You have to find the alarm set, it will say cold restart,press yes. If all else fails, open up cabinet, short capcitor out (about the size of a beer cap). This will reset system to default.
The expansion card was in the 3rd slot from the right. The problem was that I had removed it before powering up the system. I have 2 line cards and only 6 lines at this site. My BAD.........live and learn
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.