KEY MWK 1

[i2006]

Hi everibody, I'm just login in your very interresting forum, I'm a tech on succession, we have just installed it last year, so I need a lot of help.
In first for the users, is it possible to set up a key on 3903 3904 I2004 i2007 to login directly on the call pilot serveur??(without password login )
Another one little thing , sorry for my bad english but I'm French!!!

 

[asodoma]

You can set up a key on the phone to dial the voicemail number:
key xx mwk yyyy
where xx is the key and yyyy is the number you call to access voicemail.

Then, in Call Pilot, you can go into a users mailbox and in the section "DNs", there's an "Auto Logon" box next to the Extension DN that you can check off.

I think that's what you're asking...
Al

 

[kwoerner]

On your 3903's and 3904 your mwk is key 16, program key 16 mwk xxxx with xxxx=callpilot sdn.

 

[johnpoole]

after you enable auto login and auto play you need to 8* from the mailbox after you log in and enable it

john poole
bellsouth business
columbia,sc

 

[i2006]

Hi everibody, many thanks for you quick answers, so i did all yours recommandations, and I still have a problem , the key MWK doesn't appear on the handset !!! i set it please see below, normally it will be on the "roll menu" by pushing the "more" touch
On the call pilot I set the Auto logon and also auto play
DES TEST
TN 061 0 00 20 VIRTUAL
TYPE I2004
CDEN 8D
CUST 0
KEM 1
ZONE 000
FDN 7979
TGAR 0
LDN NO
NCOS 7
SGRP 0
RNPG 3
SCI 0
SSU 0050
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTA FNA HTA TDD HFA CRPA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSA-CSI SWD LNA CNDA
CFTA SFA MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUA DNDD CFXA ARHA FITD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD VOLA VOUD CDMR
CPND_LANG ROM
RCO 0
BFTN 028 0 00 15
EFD 4999
HUNT 7979
EHT 4999
LHK 1
CSDN
AST 00 02
IAPG 1
AACS YES
ACQ AS: TN
ASID 17
SFNB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SFRB
USFB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CALB 0 1 2 3 4 5 6 7 8 9 10 11 12
FCTB
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 7174 0 MARP
CPND
CPND_LANG ROMAN
NAME Gilles DELORD
XPLN 13
DISPLAY_FMT FIRST,LAST
01
02 MCR 7301 0
03 SCR 7172 0
CPND
CPND_LANG ROMAN
NAME APPT DELORD
XPLN 12
DISPLAY_FMT FIRST,LAST
04 HOT D 9 093252234
05 HOT D 5 80501
06 ADL 16 7278
07 ADL 16 7192
08 ADL 16 7180
09 ADL 16 7150
10 ADL 16 7286
11 ADL 16 7284
12
13
14
15
16 MWK 4999
17 TRN
18 AO6
19 CFW 16 4999
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
KEM 1 PAGE 0
32 HOT D 10 093252234#
33 HOT D 16 0973890

 

[johnpoole]

that phone does not have a physical message key? the 3904 does and i don't use that model.. some on the soft key appear only when they are needed.. we don't see a transfer key unless we are on the the phone and the pick key only shows if a member of our pickup group is ringing..

john poole
bellsouth business
columbia,sc

 

[yyrkroon]

The MWK key on a i2004 is a hard key located on the bottom row of the phone...its the one with the arrow pointing into a box ("Inbox")...located just to the right of the key with a picture of a book.

 

[i2006]

as you can see on my print the key 16 is mwk xxxx , I visited the FAQ on the call pilot logon question and found something, that we need to valid from the phone the auto logon facilities, so now when i dial the XXX i'm arrive directly on my mailbox it's Ok for that.
For the Key MWK is "the with the arrow pointing into a box ("Inbox")..." the 16 and why it doesnt work??
I've a lot of questions about the other key!!!

 

[yyrkroon]

One of the thing you should check is to see why is the phone acquire? Its acquire as a TN...deacquire the phone...there's no need to have a I2xxx set acquire unless the set is an ACD set...but in this case its not.



AST 00 02 -------- not necessary unless ACD/CTI or both
IAPG 1
AACS YES --------- not necessary unless ACD
ACQ AS: TN
ASID 17 --------- App Service ID ...ELAN 17???
SFNB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SFRB
USFB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CALB 0 1 2 3 4 5 6 7 8 9 10 11 12
FCTB
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 7174 0 MARP -------- non ACD
CPND

 

[i2006]

Yes as you can feel it " i'm not sure that is correct " I've a tapi serveur for receiving the fax/voice mail into the outlook inbox but i dont know why AACS if i change it what's append ??

 

[yyrkroon]

I'm about 80% sure that isn't correct...but what do I know...

First find out what equipment is attached or using ELAN 17...I'm suspecting that its CallPilot. If it is, you might have to run the Configuration Wizard to check and see what numbers are defined in the CDN information screen, or go to the SDN table and see if any of the DN from above are there...if yes, remove them.

Or, for testing purpose only...go to LD48 and run this command: DACR AGT TN (TN= L S C U format) that should deacquire the set...better yet, just create yourself a new phone and test that one.

 

[i2006]

Hi thank you that's fine now without change anything in SDN table..