junction BP50 (R16)-BTUD with MD110 (BC6)-TLU64 only work from MD->BP

[ffmartin]

Hi
I need to join a BP50(R16) with a MD110(BC6). I have used a TLU64, and work, but only from MD110 to BP50.

I have done a tracing:

BP ------ MD110
SETUP ---> (THE CALLED NUMBER STILL NOT SEND)
<------ CALL PROCEDING
<------ DISCONNECT (CAUSE:28)

AFTER THE SETUP FORM BP, THE MD110 SHOULD NOT ANSWER WITH SETUP ACK ???

Someone knows because?

 

[siouxes]

Hi ffmartin, the ISDN cause 28 mean "invalid number format (address incomplete)." and this is the correct behaviour in this case ( -> incorrect setup <- callproc <- disconnect )

Maybe you have properly setup the correct number length on the BP: first of all i think you have to use a PNR and then you have to setup the COMPLETE NL and SUBSCRIBER NL on BP to achieve the correct enblock setup.

BR.

Where MML commands can't, linux can. MXONE power.

 

[ffmartin]

Thanks you