jump start help!!!

[elemica]

Hi all

Facing a problem during jumpstart.. apparently some thing is messed up in the rules file.. even though check says rules OK.

- Configuring boot device
- Using disk (c0t0d0) for "rootdisk"
- Configuring overlap (c0t0d0s2)
- Configuring / (c0t0d0s0)
- Configuring swap (c0t0d0s1)
- Configuring /usr (c0t0d0s3)

ERROR: Could not fit slice on disk (c0t0d0s3)

ERROR: Slices or partitions over
lap (c0t0d0s3)

Disk layout for selected disks

Disk c0t0d0
Solaris Slice Table
Slice Start Cylinder MB Preserve Directory
------- -------- -------- ---- -------- ----------
0 0 521 1199 no /
1 522 956 2200 no swap
2 0 7506 17270 no overlap

Usable space: 17270 MB (7506 cylinders) Free space: 13872 MB
-----
rules file as follows

explicit
filesys rootdisk.s0 0:521 /
filesys rootdisk.s1 522:956 swap
filesys rootdisk.s2 all overlap
filesys rootdisk.s3 957:2695 /usr
filesys rootdisk.s4 2696:3130 /var
filesys rootdisk.s5 3131:4869 /opt
filesys rootdisk.s6 4870:7043 /app1
filesys rootdisk.s7 free /export/home

Appreciate help in resolving the issue. TIA

 

[elemica]

Hi all

Resolved... error in rules file


Thanks again