Jbod disks not recognized

[alino]

I have a sparc10 running Solaris10 and the jbod disks are not recognized when I boot the system. I have 2 Qlogic HBA cards installed, I could not find any drivers for Solaris10 on the
Qlogic website. I supposed that the drivers are loaded automa-
tically on Solaris10. Thanks for your help.

 

[tuka]

Go to the ok prompt and see if you can see the disks abd the HBA.

ok show-devs (look for the two hba)
ok probe-scsi-all (or probe-scsi)

If controllers are present then look for the drives via the probe-scsi command.

If drives are present have you issued a boot -r command?

If the drives are present and a boot -r doesn't configure the drives then are you sure the HBAs' are SUN Boards?

If the HBA are SUN controllers then the driver will be
loaded at boot -r time.

 

[alino]

Thank you very much for your help, I was able to solve the problem. Cheers. Alino