Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

J179 wifi 1

Status
Not open for further replies.

DavidHinote

Programmer
Dec 8, 2016
19
US
Trying to get a J179 on customer's wifi. IP Office is running 11.0.4 build 3. Phone firmware is 4.0.4.0.10. I'm able to log a cellphone in on the wifi and pull an address that I'm able to ping from the laptop I'm logged into the IP Office with. Laptop is hardwired to customer's network. J179 logs in fine on hardwire. Shows connected on wifi and even gives a link speed but will not pull an address. Tried setting J179 to static using the address my cell phone is using and then disconnecting wifi on my cell. J179 says acquiring service. Plugged the J179 back into the poe switch and it comes right up. Any thoughts?
 
Disregard. Cell was hitting different AP in the mesh than the J179 even though it was laying right next to it. J179 AP had no connection back to LAN. Driving me crazy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top