Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

J129 Disabling DHCP 2

Status
Not open for further replies.

sheldoom

Vendor
Dec 12, 2006
361
US
Anyone seen an issue with J129 randomly switching DHCP from YES to NO in it's own configuration? Also, seeing random phone display 'No SIP Proxies'. Usually restarting the phone or changing the DHCP setting resolves this, but the question is why is this happening and what is the permanent solution. System is R11.1.3.1.0.34

Thank you,

"It's all ball bearings these days" Fletch F. Fletch
 
J129s are complete pieces of shyza. We had one outfitted with a wireless card for installation at a customer's site. We commissioned the phone in our lab before taking it to site, but because it had alreay been connected to our lab's WiFi network, it would not do a discovery of any other wireless network, it was locked to our wireless network and could not be changed. We had to default and reprogram the phone on site.

 
you get what you pay for and the J129 are cheap crap ($30 on Amazon which is less than any decent analog phone). Star for Nortel4Ever for making me laugh with the shyza expression

Joe
FHandw, ACSS, ACIS

 
Thank you for adding this nugget to my vocabulary! I am obviously hoping to avoid that conversation with the customer "Dear Mister Customer, those 100s of phones you bought are Shyza, so sorry, I can't fix Shyza"

"It's all ball bearings these days" Fletch F. Fletch
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top