J100 Web access and invalid user/password

[IamaSherpa]

Facing an issue accessing the J100 via Web Access: web access has been correctly managed and the phones web page is avaliable but no way to enter the web page due to "invalid username or password".
Password has been set into the 46xxspecials:
SET ENABLE_WEBSERVER 1
SET WEBSERVER_ON_HTTP 1
SET FORCE_WEB_ADMIN_PASSWORD Avaya123

or by setting the old method in the NUSN (SET_ADMINPSWD=Avaya123), with the same result

Any idea?

 

[OmegaStar]

try 27238 (craft) as Password. I think the phone don't like the new Password, you need special character in it.

 

[William C290]

the default is 27238. Then you're forced to change it. you can also set it in the 46xxsettings.txt file. also the username is admin, all lowercase.

 

[derfloh]

The password can be set within 46xxsettings.txt thrush a NoUser source number of your 46xxsettings.txt is autogenerated.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN