IX Workplace, certificates and TLS 3

[dsm600rr]

Hello all,

Thought I would start a new thread as my other was getting too cluttered and I think I may be getting close to getting this working.

I have exported the certificate here and re-named it: WebRootCA.pem

Does this certificate then get uploaded to:?

Next would be creating the Identity Cert for the IPO Itself. How does this look?

Once downloaded as "PEM-encoded" I would add that certificate to the IPO.

After all that, and I enable TLS should my J179's grab the certificate and re-register to the IPO? What about iPhones running the Workplace App?

Thank you!

ACSS

 

[derfloh]

Then IX Workplace should have the IPO root certificate loaded...

Too many unknown factors...

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[dsm600rr]

SET TRUSTCERTS WebRootCA.pem is in my autogenerated 46xxsettings.txt

ACSS

 

[dsm600rr]

Is this part of the problem perhaps?

ACSS

 

[derfloh]

Usually it will show in IX Workplace after downloading it.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[dsm600rr]

I have discovered some sort of issue that may be causing a problem, and its boggling my mind.

I have my PBX (LAN) on the Data VLAN just so I can access the PBX from my desktop.

I have everything else on the Voice VLAN (WAN): DHCP Server (IPO), J179's, SIP Trunk, SIP Domain/Registrar FQDN, Avaya cloud services and so on.

Both VLAN's are configured identical aside from the IP Scheme.

Both VLAN's have no issues getting out to the internet

I just noticed yesterday that IX Workplace will ONLY work on my DATA VLAN.

When I try to log in on my Voice VLAN with my email address, I get "Check your web address and try again"

No issues logging in the same way on my data VLAN.


ACSS