where would one find the setting for this? if i press 0 during the greeting, i get the 0 option for the Voice Menu set in the mailbox. but, if i press 0 after i hear the leave message tone, it routes the call to the lowest numbered mailbox in the system. thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IX Messaging - zero out option after getting leave message tone
- Thread starter tweege
- Start date
- Thread starter
- #3
nothing in the personal operator field for any mailbox, which is apparently the issue. when that field is blank, and someone presses 0 after the message tone, the call goes to the ext of the first mailbox in the system....seems dumb to me. this is fixed by assigning an Operator in the Language Properties tab of the Company section.
avayaguy23
Systems Engineer
What TUI are you using? You gotta check/change that setting in the TUI that is applied to the feature group which trickles down to the mailbox.
- Status
Similar threads