ITG Problem

[prakap]

Hi,

I want to know What configurations has to be done for the ITG card.I am unable to give extensions for IP telephones in Meridian 11C mini It doesn't take TN no.
Please help me, so that I am able to give extensions.

Thanks

 

[unkalary]

It does take TNs and it takes an ISM parameter IP PHONES to impliment IP phones. Only NORTEL can provide the ISM paramenters. The switch must have a virtual loop programed. The ITG Line card (Media Card) has to be programed in the switch. Then the ITG line card has to be programed via OTM 2 or better (if IP LINE 3). Connectivity via ELAN and CLAN has to be completed also. Many more things must be done but that is it in a nutshell

 

[NTI620]

Judging by the questions that you are posting you should find a vendor to help with your install. It is more complicated and the previous reply is correct.

 

[rtycka]

NTP 553-3001-204 (system doc)

LD 117 configure IP address and zones
LD 14 configure ITG physical TNs TYPE TIE (on ITG Card)
LD 97 virtual SUPL (for IP Phones)
LD 11 IP phones

good luck

 

[russellgoodman]

need help getting itg to call throught bcm

 

[dawgnu]

hey Tack, k-man gone, b