I was wondering if anyone has encountered this issue and knows of a way to override it. My company recently had our PBX vendor block the telephone number from going out on calls made from the building. As a result a couple of people have begun to experience problems when calling telephone numbers that do not accept private or blocked calls. Normally one can type *82 to override this but it does not work when dialing from within our PBX environment. Does anyone know of a feature access code or something similar that can be used?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Issues Regarding Private Or Blocked Calls
- Thread starter pll7538
- Start date
have U tried inserting those digits in the all the routing patterns? I haven't had this problem, so haven't used this method myself.
Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
chilly1234
Programmer
Or you could get your vendor to set up a 2nd route with a different access code so when you need to display your number you can. This should not be a problem as I would guess that the vendor barred your number from within the route itself.
- Status
