Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Issue with moved ip set

Status
Not open for further replies.

wichie13

Technical User
Feb 4, 2002
235
CA
Recently moved a ip2004 set from a remote site to the main site and now the sets at the remote site can't call the moved set at the main.(clear as mud?) well it rings, and they can hear her but she cannot hear them at the remote site. This is only with the moved set it appears all other sets at the main can be called without any issues.

This is a bcm 400 4.0 The moved set was re-iped for the main site ip range and gateway.

Thanks

Wichie
 
verify that the ip info and that the Gateway info does not contain the Remote site.
 
Kung fu you got it

when i moved the set I forgot to change the gateway, still had the old one.

Thanks

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top