ISSP

[Trevatwork]

Hi

I am trying to see what patches and PEPS we have on our system and when i do mdp issp in ld 143 i get

>ld 143
CCBR000
.mdp issp

VERSION 2121
RELEASE 4
ISSUE 50 W
SYSTEM HAS NO IN-SERVICE DEPLISTS

SYSTEM HAS NO IN-SERVICE PEPS
.


Does this mean we have no patches or peps installed?

Thanks

Trevor

 

[pronei]

Simple answer.. Yup.

 

[bigindian65]

what do you get when you do issp @ the REQ: prompt in ld 22?


Mato' Was'aka

 

[Trevatwork]

Hi

Thanks pronei

How many patches\peps are we missing? Could someone post an up to date issp or point me to a list of available peps and patches

Thanks

Trevor

 

[Trevatwork]

Hi bigindian65


Same thing:

VERSION 2121
RELEASE 4
ISSUE 50 W
SYSTEM HAS NO IN-SERVICE DEPLISTS

SYSTEM HAS NO IN-SERVICE PEPS
.

 

[pronei]

Have your vendor bring you a dep list.

 

[acewarlock]

If your not having any problem's and everything works fine, Your not missing anything. Leave it alone.

If it ain't broke, don't fix it.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Trevatwork]

Hi acewarlock

We are getting multiple bug msg's and aud msg's it seems to be getting worse, i read a post from john poole and he mentioned these msg's are like your wife you can only ignore them for so long before they bite you in the a$$.

I am a great fan of "if it aint broke dont fix it"

Thanks

Trevor

 

[acewarlock]

What are the BUG/AUD Msg's. Have you looked them up to see what they are pointing at?

Patches and PEP's may not be your problem.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Trevatwork]

Hi acewarlock

AUD0021
TN in CR does not have pointer to this CR. TN in CR cleared. CR
information and progress mark output.

AUD0028
Call Register (CR) has no pointer to it. The CR has been released. No
action required. Output: CR information, TN and progress mark


AUD0370
Data base of Server {VAS ID} cannot be audited. The Command and Status
Link to the Server is disabled. {VAS ID} Note: parameters in decimal.

BUG0195
BLOCK_PTR could not be found in specified queue. Procedure REMOVE

BUG0266
ACTIVECR points to a call register that is in the IDLE queue.
Please contact technical support group.
Severity: Major

and err095 which i have read in the forum can be fixed with patch which led me to this.

Thanks

Trevor

 

[phonz1]

Nortel's Succession software is patch dependant, have your vendor install your Deplist for you, a good tech would have had that completed already!

 

[9201]

LD 143
.mdp issp