isl trunking - howto?

[lvennard]

sorry for the rough picture

||=====|| |-----------|
|| ||----|________|-+-+-+WAN+-+-|-------|###LAN
|| || Cisco 7206 |_____|
||=====|| Cisco 2610
Cat6000 switch

any ideas how to get the lan on the 2610 to use a programed vlan on the cat6k?
Vlans are already created on the 6k.
but i need to know how to configure ether on cat6k and routing on both routers. Looked on cisco's web site, no clear examples for me. if you find them please post.
Is this easier than i think?

 

[TimothyR]

I did a very quick search and came up with this.

http://www.smc.maricopa.edu/compop/smcnetwork/vlanroadmap.html

Look for this link "Configuring InterVLAN Routing" toward the bottom of the links. Hope it helps.

 

[wybnormal]

Find a copy of Cisco's book "Building Multilayer Switched Networks" It's detailed nicely in there with other items that are good to know about VLAN on cisco switches

Mike S