Isdn2e not working on ipecs MFIM50b

[Colbro1]

I have tried to get this working but cant. Can get incoming calls but cannot make any outgoing call. dial number and it just sits there.
Can anybody help?

 

[doktor]

Share your ISDN setup with us. Do you use LCR or just plain ISDN dialout. Check my next post...

///doktor

 

[doktor]

Check this "how to setup ISDN"
thread1613-1490511


///doktor

 

[Colbro1]

Hi doktor

Here are the settings I have put in.

Trans/PGM 141, CO Line Range, FK1 set to DID
Trans/PGM 140, CO Line Range set to DID
Trans/PGM 145, CO Line Range, FK2 set to number 2, use flex ddi table
Trans/PGM 231, FK1 set for 715 to ring sta 100
Trans/PGM 167, FK1,FK2 and FK3 set to Attd
Trans/PGM 143, FK6 set to fixed P-P for BT isdn2e

The system can receive calls ok, but just hangs when making calls

Colbro1

 

[xs650]

do you have programmed the VOIP trunks in another CO group?

 

[Colbro1]

Hi

It is working, my fault was using lines 1 - 4 instead of 5 - ??

Thanks for everyones help

Colbro1

 

[doktor]

Thak you for your kind update of status.

///doktor