ISDN 2

[satfinder]

I have a pager system connected via ISDN to the system as a telephone. When the pager is connect with the caller, if this have an analogue extension send the DTMF tone, if the caller is a digital phone the sistem dont't sent the necessary DTMF tone to the ISDN pager. Can I solve the problem. Thank You, Giancarlo from Italy.

 

[singhbrindisi]

BuonGiorno Gianki...

Well pls eloborate more on the issue...
1) Do you have an MD110 system connected with the paging Equipment..
2) ISDN , 2B or 30B ??
3) If yes for query no 1, once the call from the digital extnesion is connected with the paging equipment press "9" to enable tone sender & try to send DTMF tones...

BR,

 

[rfpui]

To send DTMF from digital phone You must set phone to DTMF mode
After connecting with pager pres Function key (F1) named DTMF or ETE
Or press the digit key ( 9) standard
If 9 not work look to ASPAPARNUM=56
Parval is the digit which set phone to DTMF mode

 

[satfinder]

Thank for your reply, but the system pager is connected way an ISDN extension (ITL) non way a TLU79 (trunk). The connection is way a digitally extension and the ISDN extension connettected to the pager.

 

[fidde]

You can not send DTMF from a digital extension to another internal extension. Try using the TLU79 instead you can configure this also for point to multi point.

Fidde