isdn

[edwardcateuse]

I have got an ISDN at our new premises and thought I'll just carry the nortel bcm from the old premises to the new one and connect.
Obviously running into problems...first of all I have misplaced the cable that connects between isdn to bcm.
We have isdn pri. Can you advice the connections so I can make one.

Secondly there are many ports on the isdn. Any idea where the cable should connect
There is OT
Sync
TRIB1
TRIB2
TRIB3
TRIB4

Many thanks for your help.

 

[edwardcateuse]

Please can someone kindly help ?

I am generally good at IT and would appreciate some help in the right direction.

 

[edwardcateuse]

1-2 to 4-5 and crossed

is this correct for the cable ??

 

[edwardcateuse]

Once I know the cable I can basically try all three ports. I have already asked BT to provision the lines.

 

[acewarlock]

You connect to the one that has a card in it. or unless it has all 4 cards in it, look at the lights for one that is different.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.