ISDN Trace Analyzer

[Vasiliy]

I've adopted my Ericsson MD110 Trace Analyzer and now it can decode Definity MST traces (still ISDN only). I hope it will be useful for somebody. Thanks.

http://vp.by.ru

 

[Phoneman2]

I looked I just don't understand what it will do for me. Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[Guest_imported]

Very nice! Where can I find detail on the mst command? Do ou have to be logged in at a certain level to get this?

Thanks,

Ray

 

[Vasiliy]

>I just don't understand what it will do for me.

It can help to solve some problems which can appear if you try to connect to another device via ISDN. I hope it will be useful with any other signalling protocols (CAS, for example).

>Very nice! Where can I find detail on the mst command?

Documentation doesn't contain a lot of details... BTW, look at "Maintenance for RXX".

>Do ou have to be logged in at a certain level to get this?

init, inads

 

[kva]

>>Do ou have to be logged in at a certain level to get this?
>
>init, inads

Cool... But in R7 and higher it looks like shooting a sparrows from the cannon in WC dadmin will be enough. By the way, if you can read in Russian (I suppose you can ) you couldn't invent the bicycle and just go to

http://defanalyzer.narod.ru

 

[rayc]

Can you explain "change mst" command? And what the different fields do there?

What does this do to processor if you leave PRI=Y ? Should you go back afterward and change it back?

Thanks,

Ray

 

[kva]

>Can you explain "change mst" command? And what the >different fields do there?

Read "Maintenance for ..." as mentioned above.

>What does this do to processor if you leave PRI=Y ?

Nothing until you run "enable mst" command.

>Should you go back afterward and change it back?

It's a question of your taste

 

[kva]

By the way, now the documentation for Definity Analyzer is available in English at

http://defanalyzer.narod.ru/HTML_Help/defanalyzer_help_en.htm.