ISDN T1 between NORTEL Opt 81C and a Lucent G3

[mestep]

I am trying to put an ISDN T1 between these two switches. I am the technician for the Option 81C, but I would like the programming for both sides if anyone has it. Has anyone done this before? They want to be able to pass extensions as well as the caller's name. The closest we can get is recieving the main number of the G3 with the caller's name on the Option 81C side. The lucent side can see my extension, but cannot see teh caller's name. Please help!!

Mike

 

[janaya]

Hoo Boy - Why are you trying to do ISDN/PRI? Right now they do not have transparancy between the PBX's without using QSIG software.

If you are just looking for Name display it might be a costly feature to add.

We are set up between an Option 81C (Rel 25.33) and Lucent G3 (Ver 7?) and we are just using it as a voice pipe, 24 channels. Works great for CDP, but we don't get any ISDN features. Normally you are only getting CPND.

Email me and we can talk about it. It wasn't that hard to set up.

janaya1@satx.rr.com

 

[Guest_imported]

Name display requires, probably patches. As long as QSIG packages are equiped, voila, with proper RCAP setting, name should be able to show.

 

[sureyyaayce]

ADAN DCH XX
RCAP ND2 NCT NAC

 

[Mexiko]

This may be late , but I believe the d channel in Qsig along with 3 patches from nortel will do it

 

[mlinman]

I'm also trying to setup a PRI between an 81C and a Lucent G3 (rel 6). They are connected with a T1 crossover cable.

It works but the Nortel is getting a lot of Frame slips.

The Nortel is clocking off the CO, the Lucent is looking at the PRI to the Nortel for Clock.

Any help would be great.