Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

isdn protocol signaling group and ds1 1

Status
Not open for further replies.
navy1

navy1

Programmer
Dec 29, 2005
71
US
ISDN Inbound/outbound trunks up and working but noticed signaling group form has supplementary signaling protocol field set to 'a' while associated ds1s have protocol set to 'b'. Will this ever cause an issue? Thanks
 
Sort by date Sort by votes
The is for QSIG. The b on the ds1 means you providers protocol is NI2. FYI a would be AT&T custom in that field...
 
Upvote 0 Downvote
Should both SSP field on Signaling Group form and Protocol on DS1 form match? Or is okay if DS1 has b and Signaling Group form has a?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Stinney
  • Question
Can't set SIP signaling group to not add '+' 1
Replies
2
Views
5K
Instructor of Avaya
Instructor of Avaya
km9v
  • Question
Hunt group question
Replies
3
Views
622
Tanzeem97
Tanzeem97
glmyers
  • Locked
  • Question
Hunt Group
Replies
0
Views
151
glmyers
glmyers
glmyers
  • Locked
  • Question
TRUNK GROUP REPORT
Replies
3
Views
327
glmyers
glmyers
bankingguy
  • Locked
  • Question
Egypt sample DS1 board configuration (Telecom Egypt)
Replies
1
Views
115
ZeroZeroOne
ZeroZeroOne

Part and Inventory Search

Sponsor

Back
Top