ISDN Phone

[gabry6]

Hello,

i have a new ELU26 in EQU=5-1-72. I want to use but when:
ITNUIIR=XXXX,EQU=5-1-72-00,CAT=X;

the response is:

serv is not in range

somebody can i help me?

 

[fouesnant]

Hi

Please provide SERV parameter

 

[gabry6]

Hi

i set:

itnui:dir=xxxx,traf=03030315, serv=0002120700, cdiv=000151000, roc=000001;

or

itnui:dir=xxxx,cat=17;

and response is:

serv not in range for ITS

can be the serv´s parameters? can you hel me with this?

thanks

 

[Isinor]

Hi

Try SERV=0002100000



Regards
Isinor

 

[gabry6]

Thanks, but now with:

ITNUIIR=XXXX,EQU=5-1-72-00,TRAF=03030315,SERV=0002100000,CDIV=000151000,ROC=000001;

CDIV NOT IN RANGE

 

[gabry6]

Hi again

with

ITNUIIR=XXXX,EQU=5-1-72-00,TRAF=03030315,SERV=0002100000,CDIV=000000000,ROC=000001;

is executed, but i don´t believe that is enough

 

[fouesnant]

Hi gabry6

Here is the category I use for ISDN phones
[tt]
<exccp:cat=3;
EXTENSION CATEGORY CODE
CAT TRAF SERV CDIV ROC
3 03151515 0215100000 001090000 000001
[/tt]

BR

 

[gabry6]

Now i can´t get tone in my elu26.

i understand that i must connect the isdn phone with 2 pairs. It´s correct?

white-blue (tx), white-green (rx) in the 00 position of my ELU26

Thanks

 

[fouesnant]

Hi

SO bus is a 4 wires line, each pair providing one way of signalling/speech in the same way as BRI does. If you connect only one pair, for sure it will not work.

 

[gabry6]

I connet two pairs but doesn´t work.

I don´t understand,

ITNUIIR=XXXX,EQU=5-1-72-00,TRAF=03030315,SERV=0002100000,CDIV=000000000,ROC=000001;

is correct,isn´t it?

 

[fouesnant]

Hi

You configuration seems to be correct, however, I don't know what you have set in NACDS to allow traffic with cat 3.
I suggest you to set TRAF=03151515 before to be sure that your ISDN phone is working.
Mainly the ISDN phone take power from the bus, so if you have some screen on it, it should light.
Otherwise, you have a wrong connection.
When you say that it don't work, what kind of message do you have from DTS? BLOCKED or BARRED?

 

[gabry6]

Hi

thanks for your response.

The DTS hasn´t got tone. The screen is off. Maybe is the connection