Ok, this is my problem:
When dialing into the access-router(Cisco 3640, Version 12.0(7)T,) from a remote pc using an isdn fritz card it only uses one of the to available B channels.
We use tacacs+ and i have included the "maximum links 2" on the entry for the user.
I have tested the isdn card with a cisco 800 with ppp multilink activated and everything goes allright so i assume that the line, tacacs and the access router are working fine...
am i missing something really big here???
Please i need some help, i am stuck on this
When dialing into the access-router(Cisco 3640, Version 12.0(7)T,) from a remote pc using an isdn fritz card it only uses one of the to available B channels.
We use tacacs+ and i have included the "maximum links 2" on the entry for the user.
I have tested the isdn card with a cisco 800 with ppp multilink activated and everything goes allright so i assume that the line, tacacs and the access router are working fine...
am i missing something really big here???
Please i need some help, i am stuck on this