Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISDN Caller ID and Name info Option 11 rls23 ???

Status
Not open for further replies.

mgp66

Programmer
Jan 19, 2006
7
US
Gents I have an option 11 with rls 23.
I want to provide Caller ID with Name availability.
I am currently recieving the number information and want to verify that I can recieve the Name information as well.

I thought this capability has been available since rls 18 but am not sure that my vendor is capable of configuring it properly. I have the information being sent from the carrier as far as tha carrier says.
Carrier is the new ATT. Formerly Bell South.

What exactly would I have to have setup and in place for this to work properly.
Please itemize protocols setup and PBX configuration so that I could verify truly what I need and what I am getting.

Greatly Apreciated,
Michael Penland
 
do you have a d channel on your T-1?? more importantly, do you have a T-1?
 
Yes I have A d channel. The PRI is up and I am only recieving number data. CO states that I am getting name info. I need to know if the Release supports what I need.
Ver. 21 Release 23
How should be set up at the PBX.

 
print and post you RDB for this route please, also your adan for the DCH....
 
OK Let me get that. What I am asking is if Caller Id Name information is supported with my release.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top