ISDN BRI

[avaya13]

I need to connect IP Office with Samsung OfficeServ500 using ISDN BRI can somebody help me with this(RJ 45 pinouts, admin ...)

Thanks,

MKD

 

[big70]

pin 3 - pin 4
pin 4 - pin 3
pin 5 - pin 6
pin 6 - pin 5

outgoing and incoming id on the isdn-lines set to 10
Then make shortcode,s to the trunk

Shortcode : 4xxx
Number : 4N
Line : 10
Function ail

Thats it shout be easy.

Greets Peter

 

[jamie77]

If that doesn't work try

pin 3 - pin 6
pin 6 - pin 3
pin 4 - pin 5
pin 5 - pin 4

Also make sure one system has ISDN Trunk and the other has ISDN S bus connections.

Pinouts above should work in the UK, not sure about other counties.

Jamie Green

Fooball is not a matter of life and death-It is far more important!!!!

 

[tlpeter]

i thought a BRI is auto sence ?
if i have an isdn2 i just connect it with a straigt utp cable
always works

 

[big70]

He is connecting a S0 to a Bri of the IPO then you need to cross the cable!!

Greets Peter

 

[avaya13]

The first combination was good but I just make couple calls and since than the link is down. It’s there some tool to troubleshoot BRI port, to see the status.

MKD