Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISDN BRI on Fiber Remote

Status
Not open for further replies.

sfcstroud

Programmer
Jun 15, 2005
35
US
is it possible to extend terminal equipment SILC to a Fiber remote?

We are in the process of trying to replace Verizon BRI for VTC with the 81C. Understand I need the MISP, and SILC. But in reading I also notice that they talk about clocking. and I see a cable in the diagram going from the Clock controller to the SILC.

Does this mean it's impossible to extend the BRI to the Fiber remote?
 
I have looked more into the docs on this issue.

Currently our 81C has 4 pri's, and no ISDN BRI's. We have a Polycom VTC with Verizon BRI's direct. We would like to drop Verizon and add the VTC to our 81C.

Thus far I believe I can add 1 MISP in the Main System, and 1 SILC in the fiber remote.

If i follow this path, will I be able to route VTC calls in and out my existing PRI's as I think I can. Or, do I need to bring the existing BRI's into the 81C to support this?

If anyone has already done this, I would love to hear from you.


 
Have seen SILC and UILC BRI lines working on Fiber Remote Multi-IPE.
The clock cable you were seeing would only be for a BRI trunk which is not what you are doing.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top