Is this sey up possible?

[Jd925]

Hi, I am switching from legend to partner but first, I need to make sure that the system can handle what I need. OK here it is

There would be 16 extensions. There would be 3 lines I will call these extenions 1-16(here not on the system)
Extensions 1-14 should all have line one. extensions 3,7,8,10,11,12 should be the only ones that can use line 2 (meaning line 2 should only ring and be accesible at these sets) Extensions 12,15,16 should be the only extensions that can access line 3. In addition the system should have outsied CID on all sets (all sets are digital) in addition to this music on hold for all lines. THANKS Jake

 

[exsmogger]

Yes to all your questions. Lines can be assigned or not assigned to extensions as desired. I assume you'll be using an ACS so caller ID is automatically available to any ringing set, and music-on-hold is atandard.

Brian Cox

http://www.jandjcommunications.com

 

[upstateny]

Keep in mind you need display phones (not just digital sets) to see the caller id info