Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there a way to stat Clan & Medpro boards? 2

Status
Not open for further replies.
Irvineca949

Irvineca949

Technical User
Jan 31, 2011
151
US
I want to see if my CLAN and Medpro boards are up. Is there a command in ASA to do this?


S8500 CM 5.2
 
Sort by date Sort by votes
C-LAN boards are assigned Link numbers (display communications-processor links). If you do 'status link x' is will show 'connected'. MedPro boards do not use links.

Another way would be to test the board: 'test board [slot]'. There are portions of the test that are specific to the ethernet connection.

Kevin
 
Upvote 0 Downvote
You can use the command "status clan-port <board>17". Of course make note of the boards position. For the Med-pro use the command "status media-processor <board>
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

LisaJP
  • Locked
  • Question
thread690-1807872 There is a newer
Replies
0
Views
83
LisaJP
LisaJP
Turtlepuke
  • Locked
  • Question
Quickest Way To Get All My Announcements On A New Media Server 1
Replies
3
Views
750
JefferP
JefferP
DevanteWeary
  • Locked
  • Question
Is there a way to temporarily ignore calls?
Replies
1
Views
80
AvayaTier3
AvayaTier3
abdou9
  • Locked
  • Question
one way audio when transfering calls to PSTN
Replies
1
Views
197
avayaguy23
avayaguy23
Avaya_Enjoyer
  • Locked
  • Question
Using a virtual station to record a call?
Replies
5
Views
471
YPC
YPC

Part and Inventory Search

Sponsor

Back
Top