Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is it possible to have the vm from operator ext forwarded to another e 3

Status
Not open for further replies.

ddools

Technical User
Nov 8, 2005
65
US
Customer wants the vm from ext 21 prime set (operator set) sent to his ext # 23. He want to make sure that he gets any vm's left on the prime set ext 21 sent to him.
 
use alt ext - 23 under the mailbox programming for 21
 
If there is nobody sitting at Ext 21 (operator set) then forward the phone to ext 23. Feature 4, 23 that would do it.
 
problem lies with that there is currently a mailbox at both ext's so, alt1 will not work. There is someone sitting at 21. So I ak not sure
 
Remove Vmail from 21 and make 23 prime set in programming.
 
Customer now states that when someone dials in his ext 23 from the AA it rings at all of the phones.

We had set up the system so when a person hits 0 for an oper it would ring at all of the phones in the warehouse and would leave a voice mail in his VM ext 23. This is what he wanted, but he does not want it to do it when some hits 23 from the AA because other people are picking up his personal calls. It is currently doing it now. Did we screw up or is there some other way?

Question: Is it possible to change it so that when a person hits ext. 23 it only rings at his ext and goes to his vm without losing the 0 ringing at the other phones?

Would it be easier just to have the voice mail from 0 go to a general mail box and not his?

Southie Boy!
 
Customer is looking to stop the AA from transfering ext 23 to all of the phones; Is this a dn issue?
Cust is now looking to have the 0 vm directed to a mailbox (general). Help cust from heck!

Southie Boy!
 
No Takers? Well thank you for trying anyway![ponder]

Southie Boy!
 
If you make the ATDT avail in the voicemail settings under AA, table...Then build a hunt group in system programming and assign memebrs to it that you wish to ring when 0 is pressed. The only hitch is you are at 2 digit DN's and hunt group programming is not available to you until you make it three digit DN's. Now in order to accomplish this you will need to Perform a startup on both your system and voicemail, shnge the starting DN to be 221 in the system and thenthe voicemail will follow. You will have to reprogram both system and vmail.

What Voice mail do yo have??
 
You can have mail box 21 message notify internally to 23 when a message is left. You can then check themessages in 21. I don't think you are going to find a way to share the message or forward from one box to another automatically.
 
jdslay is right, the only and best way to set up calling difrent extensions is by using a hunt group as the Atendant DN and program the Extensions you want to ring as members of the DN

now, to get the messages from the attendant extension to the administrators phone, the best way to do this is by adding a unified messaging license to the CP100, and programming the administrators email client (Outlook, Outlook Express) to login and retrieve those messages. this way, the operator will have no idea that the messages where already checked (the administrator can 'Mark as Unread') any message, the administrator can also save a copy of the message on his PC and share with anyone who has an email address.

if you want to implement that, give me a call, I can sell you the UM license, and teach you how to install it on the CP100 and on the administrators PC.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top