Is anyone using Raspberry Pi 3 for remote access to ip office? 1

[tfisher7us]

I want to start using raspberry pi to access remote customers ipoffice. I've been playing around with on here in my office but when i try to run the web manager it wont let me connect to the ipoffice it gives me your connection is not private. on windows I can hit advance and proceed. But it never shows the proceed in Chronium.

 

[ipohead]

Think this is down to Chromium and not the IP Office. You should be able to find info on the web but one cause may the date/time especially as the RPi doesn't have clock.

 

[skeeter242]

Hi,

I developed a little system with raspi and pfsense.
The raspi is setting up a openvpn tunnel to the pfsense and then you can reach the ip office and other components via napt.
Everything is configurable through a web gui on the raspi.

Greets

Sascha

 

[tfisher7us]

skeeter could you send me some setup instructions on this? Im new to this raspi stuff

 

[karlzre]

Hi Skeeter,

I'm interested too.

ACIS - ACSS

 

[Alfalis]

WebManager is a good start but how are you getting SSA and Monitor to run for debugging purposes?

 

[janni78]

Debugging? What do you mean? Just ask on Tek-Tips, they have a great IP Office forum

"Trying is the first step to failure..." - Homer

 

[skeeter242]

Hi,

You don´t use the Raspi desktop to get into the IPO.
You use the software on your PC. And for the connection IP you use the VPN-IP of the Raspi.
The Raspi does NAPT to send the packets to the IPO or other components.
Take a look at the attachment.

 

[Alfalis]

Looks interesting, I'd say this calls for some kind of setup guide, skeeter ;D