IPSI TN2312AP Board

[pabell]

*Just wondering if anyone out there knows the
default Craft (password) for the IPSI board

*logging into the IPSI board and trying to set
the static address for the first time

*with crossover cable telnet to the address and
I get the [IPSI] prompt

*type ispilogin

returns with

login : (type) craft, but it has a different password
then the media servers

able to log into S8700 servers but not the IPSI board in the S8300 .....looking through the CD and other documents
but unable to find

IPSI board is in slot 2 of the A cabinet ....
also tried the reset dip switch on the IPSI
board but since nothing was set no need to
anyway

Thanks for any and all posts ....

Pabell

 

[xfiles9]

try serv1ces as the password

 

[pabell]

Thanks!
Able to login and set my IP Address

show control interface reflects changes as well

as seeing "IP" displayed on the front LCD

documents say to connect "network" to the back of the

IPSI board (slot #2) but I'm not able to ping ....

able to ping to IPSI board when plugged into the Network

jack in the front below service port ????


Thanks for the reply


Pabell