Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPOCC Distributed Agents

Status
Not open for further replies.

msalvary

IS-IT--Management
May 24, 2010
8
TT
I have successfully implemented IPOCC with IPO SE. However, I'm only able to add agents whose extensions are off the Primary Server. The user profiles of the expansion systems do not have the IPOCC Agent Type option in Telephony/Supervisor settings. Can agents also be off expansion systems, like an IP500V2?

Thanks.
 
No, all agent must be on the Primary server.

"Trying is the first step to failure..." - Homer
 
Anyway I suppose you can provide user login from any extension in the whole system, so you can set the agent user on the primary but login from the 500v2
 
I figured it out... Quite simple actually - to add IPOCC agents to any expansion system of an IPO SE system with IPOCC, simply set the Contact Center type to IPOCC in the System tab of each expansion system. I was able to add agents using digital sets, and it worked perfectly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top