IPOCC Distributed Agents

[msalvary]

I have successfully implemented IPOCC with IPO SE. However, I'm only able to add agents whose extensions are off the Primary Server. The user profiles of the expansion systems do not have the IPOCC Agent Type option in Telephony/Supervisor settings. Can agents also be off expansion systems, like an IP500V2?

Thanks.

 

[janni78]

No, all agent must be on the Primary server.

"Trying is the first step to failure..." - Homer

 

[IamaSherpa]

Anyway I suppose you can provide user login from any extension in the whole system, so you can set the agent user on the primary but login from the 500v2

 

[msalvary]

The reference configuration document indicates that agents can be off expansion systems in an IPO SE configuration. It even says that agents can use digital phones, which warrants an an expansion system.

https://downloads.avaya.com/css/P8/documents/101004867

Msalvary

 

[msalvary]

I figured it out... Quite simple actually - to add IPOCC agents to any expansion system of an IPO SE system with IPOCC, simply set the Contact Center type to IPOCC in the System tab of each expansion system. I was able to add agents using digital sets, and it worked perfectly.