Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ipo500v2 auto restart

Status
Not open for further replies.

MoJHK

Systems Engineer
Nov 16, 2017
180
HK
Dear rexpert,

How can I check the reason of the restart. Where is the log?
 
Here

Annotation_2019-09-05_110917_yvlv5f.jpg


ACSS (SME)
 
Yes, I found this in alarm as "normal restart" but could not find further information about it. Also, no other events caused this restart.
 
You can roll over a monitor trace if the event is occurring repeatedly.
You would run at least the system events filter. I would advise running monitor with all default filters on.

you can also run a continuous snapshot of System status as well, but this is less helpful than monitor. It can be an important piece of the puzzle though.

remembering Intrigrant 2019
 
If you look in the audit trail of either Manager or SSA it will at least tell if it is a power fail or a cold start. At least you can rule out AC power in the form of a brown out as the cause.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top