Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO500 with Valcom 2001a

Status
Not open for further replies.

cctech1956

Vendor
Aug 29, 2011
14
US
thread940-1644041 I am wondering how this works with a Valcom 2001a. What is the correct way to programm a trunk port. Does this setup require any interface between the Valcom and IPO500.
 
See my last comment here

Use a analog station port setup as a paging port, disable MWI and number presentation, give it a phone number.
Create a user with the same telephone number.
Power cycle IP Office.
Now you can dial the above users telephone number and announce your success....
 
When you say give it a phone number do you mean an extension number? And when you say create a user do you mean a short code to the extension?
 
....
In IP Office you have phone extensions and users.
The phone is at a fixed location and it has a extension number.
A user can be on any extension but if the users phone number equals a extension then the user will be linked to that extension.
So... you have a extension and to be able to let the extension ring there must be a user linked with it.

Did I mention shortcodes? No.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top