IPO Web Manager 2

[makemetrend]

Does anyone of you encountered the slowness of response of the Web Manager? How did you resolved it?
For example: once you tried to login it took to long to respond to have successfully logged in & when also doing a changes in web Manager it is not instantly did the changes.

IPO 11.0.0.0

 

[icet500]

Have you tried a different browser? If yes, then you may need to re upload the web management files.

 

[makemetrend]

@icet500 - how would I do that?

 

[critchey]

R11.0.0.0 is a bad release... basically all GA are bad releases with a few exceptions.

I would recreate the SD card using a better release of R11.0 (R11.1 is junk imo). When asked make sure you add the web manager files. Between the better release and re-doing the web management files it hopefully will fix it for you.

The truth is just an excuse for lack of imagination.

 

[makemetrend]

@critchey - So I need to patch the IPO for better results. Re-creating the SD card is not go to move. The company is already in production tho. Thanks critchey!

 

[critchey]

You often times will need to recreate a SD card that is in production if it develops a fault. You can shut down the SD card while it is running through manager and you get a couple hours (cant remember if its 2 or 3 hours) where the system will run with no SD card. If you have embedded VM it will take the VM down but if you have VM Pro it will not take anything down. You can recreate the SD card and reboot the system in about 15 minutes. If they can't be down 15 minutes to fix an issue then the issue isnt that bad.

The truth is just an excuse for lack of imagination.

 

[eikki]

Thanks for the information