Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO Server Edition R 8.xx IP Phone 1608 Registration.

Status
Not open for further replies.

alankrut

Technical User
Jan 28, 2009
259
US
We have IPO SE R 8.1.x with IPO 500V2 as expansion system. We have connected ONE 1616 and THIRTEEN 1608. Out of these 13 Nos. of 1608, 4 Nos. of 1608 are working where as other 9 Nos. of 1608 do not work. These Non-working IP Phones display all the details. All 1608 are of the same version and firmware. Any solution..?
 
What do you mean by do not work? Aren't booting?, do not power up?, don't get dialtone?, any error messages?
pleases describe in a little more detail what your issues are.
 
Sorry for insufficient info : They power up, do also have dial tone but could not establish a communication with any of other IP Pones. Please note - 1 1616 and 4 1608 work perfect among them selves. All these phones are of same firmware version..
 
Are they on the same location?
Are they on the server?
What type of connection is there between the server and the phones?

You need to be more specific.


BAZINGA!

I'm not insane, my mother had me tested!

 
Yes.. They all are in the same location. They all wre eith server. All the 1608 are in LAN (Same network).
 
The same switch?
It sounds like a network error to me.
Disable direct media path on the extensions and see if that works.


BAZINGA!

I'm not insane, my mother had me tested!

 
Ok.. will chk & get back.. Thanks tlpeter.. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top