I have a primary and secondary IPO server and 7 V2 chasis all running 9.1.6. The V2s were all upgraded from V1s to make server edition work
Up until we migrated to a server-expansion solution my paging to phone sets on the V1s worked
To make a long story short, if I only have 10 users in the paging hunt group it works excellent.
I put 30 in the hunt group all pages are garbled and cant be understood
If I put 75 in the group the page doesn't go out at all
Realistically I need about 120 users in my paging group to work effectively
The same 120 member group worked no issues from the V1 chassis before upgrading to V2 and then expansion
I am using a combination of 9608, 5610 and 5410 sets
TIA
Up until we migrated to a server-expansion solution my paging to phone sets on the V1s worked
To make a long story short, if I only have 10 users in the paging hunt group it works excellent.
I put 30 in the hunt group all pages are garbled and cant be understood
If I put 75 in the group the page doesn't go out at all
Realistically I need about 120 users in my paging group to work effectively
The same 120 member group worked no issues from the V1 chassis before upgrading to V2 and then expansion
I am using a combination of 9608, 5610 and 5410 sets
TIA