Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO Server 9.1, CLI and Twinning issue on SIP trunk

Status
Not open for further replies.

Joledur

Vendor
Feb 13, 2012
47
CA
Hi,

On certain incoming call over Telus SIP trunk, I receive 444-555-6666@172.10.10.10 (correct incoming phone number@IP address of A1 Nic of the SBC)as caller id, but only on few of them, most of the calls display a correct name and number caller id. There is more, when this problem occur, the Twinning don't work. Phone are 9608, IPO 9.1.6, SBC 6.3.

Any idea?

Thanks
 
I have this same issue on 9.1.6. we never had it until that release.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications
 
Can you post a traceSBC showing the two different flows and the twinning failure?
 
There is a patch available for server edition and support says it will be fixed with SP8.
 
Did you get this patch directly from support? I don't see any patch on the support site (except for ACCS) and it don't seem to be fixed by 9.1.7.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top