Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO send different CLI to called party with different line key?

Status
Not open for further replies.

MoJHK

Systems Engineer
Nov 16, 2017
180
HK
lDear Experts,

Is it possible to send:

Line 1 1234 5678
Line 2 2345 7890

to the called party with the above CLI?
Or how to do it?

 
Why🤷😵‍💫

Have you tried it.

Why not send any number at all…no cli instead
 
If you're running R11, try MADN to make an appearance key for another extension. If the outgoing trunk is SIP, program the secondary extension to send a different CLI on outbound calls.

If you then push that secondary extensions MADN button and dial a number, see if that sends out the alternative CLI.

Thanks, Tim
Adelaide, Australia
 
Use shortcodes.

If using SIP, make a new line within the SIP URI/Call details that uses 2345 7890 as it's local uri and contact data. Say line 55 for outgoing

Then a shortcode *55N
Dial
N
Line group 55

So they will need to dial *55N to show 2345 7890
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top