Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO R8.1 ATM on a fritz box

Status
Not open for further replies.

karlzre

Technical User
Jan 2, 2007
344
BE
Hi,

I have a IPO R8.1 at home, the ATM card is connected to the FON port of the fritzbox.
Fritzbox connect to the operator with sip.

When i make a incoming call, and nobody answer, the phones continue ringing on the ipo.
Today someone called and nobody answered, i received a voicemail with only a busy tone in it.
I assume it's a bad setting on the ATM card, which setting do i have to set on it ?

Thx


ACIS - ACSS
 
This sounds like disconnect isn't happening. Seems like you may have to set this manually using tones:
You would need to find the busy tone being delivered by the box and put into the busy tone detection under System>Telephone>Tones.
After this you need to turn off disconnect supervision for the line so I will use the tones.

NCDS | NCSS | APSS - SME | ACIS - SME | ACSS - SME | ACIS - UC | ACSS - UC | APSS - SCOPIA | APDS - SCOPIA | CCENT
 

Which Fritzbox do you have as some have an ISDN (So) port.

You could look for a cheap BRI card which may work better - there are some references to ISDN PBX in the docs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top