Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 7.0 with SCN

Status
Not open for further replies.

56BelAir

Programmer
Oct 23, 2006
388
US
Have 2 sites with IPO 7.0 with voice networking authcodes in both, need to know how to route all outbound traffic out of site "B" to go out of site "A" PRI circuit.
Ive done this many times in Nortel BCM and CS1000 but never in IPO.
 
So on site B you have a System Short Code ? goin to Line Group ID Main.

Change the Line Group Main to the line group that goes to site A and Bingo all numbers dialed that don't match codes on B goto A.

If you are dialing 9 for a line out then in that case change the Line Group ID there to Site A.

[cheers]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top