IPO 7.0.12 SIP Outgoing problem

[oldfree]

Hi all,

I upgraded the system 5.0.22 to 7.0.22. My sip trunk not working now.

I traced SIP calls. and I found a problem. please check the trace to listed bellow

OVER 5.0.22 (WORKING FINE)

246108mS Sip: 18.1067.0 21 SIPTrunk Endpoint(f51c27c4) received CMSetup
246110mS SIP Call Tx: 18
INVITE sip:05418678356@212.252.48.5 SIP/2.0
Via: SIP/2.0/UDP 195.33.241.34:5060;rport;branch=z9hG4bK55af7f5e9d0c35371a6a962f21e1046a
From: "02123490510" <sip:02123490510@195.33.241.34>;tag=693e9a2bfb6372b1
To: <sip:05418678356@212.252.48.5>
Call-ID: 28d094fd863a66c583b6af998b8a9051@195.33.241.34
CSeq: 1243567604 INVITE
Contact: "02123490510" <sip:02123490510@195.33.241.34:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO
Content-Type: application/sdp
Content-Length: 301

v=0
o=UserA 1676509114 2107596842 IN IP4 195.33.241.34
s=Session SDP
c=IN IP4 195.33.241.34
t=0 0
m=audio 49152 RTP/AVP 8 0 18 4 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:4 G723/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
246111mS SIP Tx: UDP 10.10.10.10:5060 -> 212.252.48.5:5060
INVITE sip:05418678356@212.252.48.5 SIP/2.0
Via: SIP/2.0/UDP 195.33.241.34:5060;rport;branch=z9hG4bK55af7f5e9d0c35371a6a962f21e1046a
From: "02123490510" <sip:02123490510@195.33.241.34>;tag=693e9a2bfb6372b1
To: <sip:05418678356@212.252.48.5>
Call-ID: 28d094fd863a66c583b6af998b8a9051@195.33.241.34
CSeq: 1243567604 INVITE
Contact: "02123490510" <sip:02123490510@195.33.241.34:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO
Content-Type: application/sdp
Content-Length: 301


TRACE 7.0.12 NOT WORKING

INVITE sip:05418678356@212.252.48.5 SIP/2.0
Via: SIP/2.0/UDP 10.10.10.10:5060;rport;branch=z9hG4bK318e8828f4675dc3c5505509efcecfba
From: "02123490510" <sip:02123490510@195.33.241.34>;tag=55c22f4fd3d466dd
To: <sip:05418678356@212.252.48.5>
Call-ID: 86ee727003ac4de014d89a6677481d87@10.10.10.10
CSeq: 1358401359 INVITE
Contact: "02123490510" <sip:02123490510@10.10.10.10:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Content-Type: application/sdp
Supported: timer
Content-Length: 296

v=0
o=UserA 3307066741 695660754 IN IP4 10.10.10.10
s=Session SDP
c=IN IP4 10.10.10.10
t=0 0
m=audio 49154 RTP/AVP 8 0 18 4 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:4 G723/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
100981mS SIP Tx: UDP 10.10.10.10:5060 -> 212.252.48.5:5060
INVITE sip:05418678356@212.252.48.5 SIP/2.0
Via: SIP/2.0/UDP 10.10.10.10:5060;rport;branch=z9hG4bK318e8828f4675dc3c5505509efcecfba
From: "02123490510" <sip:02123490510@195.33.241.34>;tag=55c22f4fd3d466dd
To: <sip:05418678356@212.252.48.5>
Call-ID: 86ee727003ac4de014d89a6677481d87@10.10.10.10
CSeq: 1358401359 INVITE
Contact: "02123490510" <sip:02123490510@10.10.10.10:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Content-Type: application/sdp
Supported: timer
Content-Length: 296


--------------

Diferent is via ip parameter.

1st trace via 195.33.241.34 (Public Address)
2nd trace via 10.10.10.10 (LAN1 address)

There is no change configuration after the upgrade. But I could't find eny thing to fix this problem.

SIP Trunk uses LAN1 network topoloji, Open internet and public adres has been set to 195.22.241.34


Any idea

Regards

 

[hairlessupportmonkey]

are you using a stun server though and does it work? when you hit Run Stun, does it fill your topology fields in?


ACSS - SME
General Geek

 

[oldfree]

yes I used but It did't work.

I tried all network topology settings. I couldn't change "Via: SIP/2.0/UDP 10.10.10.10:5060" to real ip. When I downgraded the system to 5.0.22 it worked.

 

[tlpeter]

Show us your ARS

You must have somekind of @10.10.10.10 in it i think.
You could also try it with:

N;
Dial
N line ID sip trunk.


BAZINGA!

I'm not insane, my mother had me tested!

 

[oldfree]

My ARS :

N;
Dial
N"@212.252.48.5"
SIP OUTGOING ID

I'm sure I haven't used 10.10.10.10 address any configuration except LAN 1 settings


I think Service provider can fix this issue. Because I have a other custom with same provider(System 6.0). Traces likes 7.0's trace.

 

[tlpeter]

So Lan1 is 10.10.10.10?
Do you have set "Use network topology" set to "Lan1" ???
If yes then set it to "None" and use an IP route to 212.252.48.5


BAZINGA!

I'm not insane, my mother had me tested!

 

[oldfree]

Yes LAN1 is 10.10.10.10

I tried before that and i configured ip route.

 

[oldfree]

I can send config to you tlpeter.

 

[tlpeter]

You could try but i am not allowed to post my email address here


BAZINGA!

I'm not insane, my mother had me tested!

 

[hairlessupportmonkey]

just upload it to your favourate filesharing site and post the link. e.g Rapidshare.

ACSS - SME
General Geek

 

[oldfree]

Thank you very much guys,

I'll fix this issue with service provider