IPO 6.0 Locks up

[Shermanchicken]

Recently the IPO 500 locks up. This has happened twice only over two weekends. The phones(5410) display shows all of the buttons but the time is incorrect. The buttons don't work except the volume control. No inbound or outbound calls work as well as internal calls. I reboot the system and everything works great. I did start monitor after the fact to see if it happens again. System Status shows no power loss over the weekends.

Has anyone heard this type of problem?

Thank you

 

[Telecomboy]

If it is an IP500 V1 then I have been seeing lots of issues with them recently. I had one that the time keeps resetting to 7PM every 2 hours. I have another that deletes the night service status about 30% of the time (and have verified it is not power related or user related). Another was rebooting every 2-3 days (not power related). Upgrading to a 500V2 fixed the 2 clients. The client with night service issues is still just living with it.