avayarized
Instructor
I am trying to set up a Dialogic Diva USB ISDN modem on a Virtual windows XP pro PC here (would love it to work on host PC which is W7 but is not supported) in the UK so that I can remotely manage client's Avaya IP Office.
We have 2 others on a 2 x BRI cards, and these all work, mine in the same port does not.
The software and drivers install OK but when I do a line test I get:
Layer 1 error: check cable/NT
The cable is OK and our IP Office works OK on our ISDN2 connection
The Diva ISDN monitor tool has 2 green lighrts but doing a line test it shows an error s
Does anyone know if there are any specific settings that I need to get this working?
If any further information is needed to assist me with this please ask
We have 2 others on a 2 x BRI cards, and these all work, mine in the same port does not.
The software and drivers install OK but when I do a line test I get:
Layer 1 error: check cable/NT
The cable is OK and our IP Office works OK on our ISDN2 connection
The Diva ISDN monitor tool has 2 green lighrts but doing a line test it shows an error s
Does anyone know if there are any specific settings that I need to get this working?
If any further information is needed to assist me with this please ask