Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 500 PBX Delay/Bandwidth Problem

Status
Not open for further replies.

jdaley1980

Technical User
Oct 19, 2010
46
US
Does anyone know how to compress the data coming out of LAN1 on an Avaya IPO v2? We have 2 IPO connected between an ATM circuit. We've only been allotted 50k so when I make a call there's a 1 second delay. For now we can't get anymore bandwidth because this circuit has other secure channels connected to it. Eventually next year it will be upgraded to an IP circuit and we won't have this problem. Any ideas?

This is pretty much a simple explanation of how we have the IPO network set up.

IPO1<--100mbs--> Cisco Router1 <--50,000kbs--> Multiplexer1 <--T1--> ATM1 <--T1--> ATM Cloud <--T1--> ATM2 <--T1--> Multiplexer2 <--50,000kbs--> Cisco Router2 <--100mbs--> IPO2
 
50kB .... what year do we live in? Use a G723 codec and MAYBE you can have a converstation but don't expect quality audio because that will be very poor.
You can't do anything else.

If it ain't dutch it ain't much
 
50kB sounds like my first dialin internet connection :)

BAZINGA!

I'm not insane, my mother had me tested!

 
I think it already as G.711 uses more then 50kb

BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top