Does anyone have any idea if I can configure an IPO 500 to route calls to a FaXcore Fax server with a brouktrout TR1034 T1 card.
They currently have an AdTran device inline before the IPO which grabs these calls and reroutes them.
They are adding 2 new Sprint PRI's and they would like to remove the AdTran form the picture and have the IPO handle the fax did routing.
I know how to do this using analog Extn ports, however i have never done it with a trunk port let alone a T1 trunk port.
I cannot find any documentation anywhere for this.
ACA Implement: IP Office | Convergence+ |
They currently have an AdTran device inline before the IPO which grabs these calls and reroutes them.
They are adding 2 new Sprint PRI's and they would like to remove the AdTran form the picture and have the IPO handle the fax did routing.
I know how to do this using analog Extn ports, however i have never done it with a trunk port let alone a T1 trunk port.
I cannot find any documentation anywhere for this.
ACA Implement: IP Office | Convergence+ |