IPO 406 upgrade to 4.x

[Marko46]

I am planning to upgrade my IPO to 4.x version. Now i am using 3.2. The reason is that i want to have all my IPO applications on same version ( Phone manager, VM and Office version) I have IPO 406 with Phone 30 module. Using 1 BRI card. Phones are 8 digital and 20 analog. Did anybody ever noticed any problems with 4.x version? I would be very grateful for you answers.

Best regards, Marko

 

[spridge]

From your description you have an IP406v2.

I have upgraded several of these units to Vesion 4.0 & 4.1

Read the upgrade PDF which accompanies the download files,
ensuring you load the interim 3.299 bin file before the 4.x version

 

[TomMills]

use 4.1.9

 

[tlpeter]

First of all you need to know if it is a 406v1 or a 406v2 !!!
Then second what is the pcs number of the 406v2 (if it is a v2)

If it is pcs 8 or higher then you can upgrade
Is it a pcs 6 then you need to get it swapped by a new one
If it is a pcs 7 then you need to check the memory
If it is a 16MB version get it swapped
Is it a 64MB version then you can upgrade it
So be carefull !!!


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!