Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 400 phone 16 on IPO 500v2?

Status
Not open for further replies.

phoneguy518

Vendor
Mar 4, 2013
2
US
a friend wants to sell me an IPO 400 (white) phone 16 module for my IPO v500. (cheap) The question is will it work on my IPO 500 v2 running 9.0.4.963 essential software? he is out of state and I can't try before i buy. Any thoughts/
 
I think you should be good. We have a few IP 400 Phone (analog) expansion modules jacked into IPO 500 V2 8.1.67 at various sites.
You may have to upgrade the software version on it, via manager but I think that's automatic, after you reboot the stack. The expansion module needs to be up and running before you reboot the core.
 
R9.1 is a interesting upgrade, a lot better as the versions R8 and R9 were.
I am bound not to reveil anything but it will leak on the internet sooner or later so keep an eye on it.
 
Is there a technical reason for support being dropped in v9.1 or is it just a way to sell new 500 kit?

BTW I recall from v8 the 'large' license is needed to support external modules.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top