IPNS

[fouesnant]

Hello

I have some difficulties to understand the setting of D1 in VARO.
I have tried the following settings :
[tt]
ROCAI:ROU=20,SEL=7110000000000010,TRM=5,SERV=2110000001,NODG =0,DIST=30,DISL=128,TRAF=03151515,SIG=111110000031,BCAP=111111;

RODAI:ROU=20,TYPE=SL60,VARC=00000310,VARI=35460000,VARO=(D1)6300000 ;
RODDIEST=6,ROU=20,ADC=1646100000000250106000000,SRT=2;
[/tt]
D1 VARO = 0 or 1

When setting D1 VARO to 1, I cannot see any difference, except a STATUS message from protocol point of view. Is there somewher in Alex a documentation specifying what is a IPNS and what it is used for?

 

[TripleT]

I believe IPNS stands for Inter-PABX Network Signalling.

It should be used when connecting between 2 x PABX'x and Using QSig.

The other Options for this Parameter are Usually ETSI and Country Specific Protocol for connecting Using ISDN to the PSTN.